6051XL-S

6051XL-S, SH

Solid Door Reach-In Refrigerators

Width x Depth x Height 513/16" x 325/16" x 791/2"
(130 cm x 82.08 cm x 201.93 cm)

Weight 454 lb (205.9344 kg)

Power Output 8.0 Amps

Exterior Top and bottom are constructed of 24-gauge galvanized steel. Exterior sides are 0.032 aluminum. Front housing is 22-gauge stainless steel.

Doors Unit is provided with hinged solid front door(s). Door exterior is constructed of 22-gauge stainless steel. Interior door liner is ABS. Doors are provided with locks, magnetic gaskets, self-closing, edgemount hinges; and quick grip long length door handle(s). Doors are field reversible with no drilling required.

Interior Liner is constructed of seamless, one piece ABS material with 15 molded shelf supports spaced 3.00"(7.6cm) apart. Three epoxy coated wire shelves, rated at 250 lb. load capacity each, are provided per section. Shelf supports are also capable of holding two 12"x 20"pans (by others) or one 18"x 26"pan (by others) per level. Liner comes with a limited lifetime warranty.Units are completely insulated with a minimum of 2.00"(5.08cm) high density foamed in place polyurethane.Interior is lighted by one 40-watt incandescent light (by others) on one and two door models, and two 40-watt incandescent lights (by others) on three door models. Lights are located outside of the food zone. Door activated switches control the lights.
Refrigeration System All components are mounted to the exterior cabinet ceiling, outside the food zone and are assembled as one piece and can be removed as one piece. Environmentally friendly R404A refrigerant is used. System has the capability of maintaining between 27ºF and 40ºF in heavy use food service operations. Refrigerant is metered using a highly responsive thermostatic expansion valve. System is controlled using Delfield's ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reducing compressor cycling and longer compressor life with lower energy consumption.

Control System The control system uses adaptive defrost to assure evaporator coil is free of ice and operating at optimum efficiency. Evaporator condensate is eliminated using an energy efficient hot gas system.

Other Unit is supplied standard with a 10'cord and plug, attached. 4" diameter casters with an overall height of 5" are mounted on the unit from the factory on self-contained models. Remote units are standard with legs. Legs are constructed of painted metal and are 6" high with 1" adjustability to compensate for installation location factors.

Energy Use 3.65 KWh daily